HCi Terminator

What is the Terminator System?

Conventional Piping vs. The Terminator System

The Terminator System is a method of piping HVAC terminal units which minimizes the time and space required to make the connection between the distribution piping and coil. To accomplish this, HCi has produced a series of products designed specifically for use at an HVAC terminal unit, which, when combined create the Terminator System.

Note: Material cost does not include cost of copper pipe. Costs are based on 3/4" hook-up.

Saves up to 77% on the installation time with in 50% less space required!

The Terminator System revolutionizes terminal unit piping because all components typically installed at the terminal unit are combined into a single package. Each package is 100% leak tested, then individually tagged with the coil location designated by the customer supplied schedule. All that is required is to inform us of the coil pipe size and type, distribution pipe size and type, control valve size and type, and the flow-rate schedule. Packages can be provided with, but not limited to, ball valves, strainers, hoses, drains, air vents, extensions and fittings.

Home | Products | Tools | News & Events | Contact Us

LEGAL DISCLAIMER
The Jomar web site attempts to provide information which is correct and up-to-date. However, errors do occur and therefore Jomar does not make any representations or guaranties that the information on its web site is free of errors. Therefore, when reviewing and/or using Jomar's web site, you must accept that the information on this web site is without any express or implied warranty that it is correct and that you accept the risk that the information on this web site may be incomplete or inaccurate. Additionally, Jomar shall not have any liability for any direct or indirect damages, any direct or indirect incidental damages, or any direct or indirect consequential damages regarding any of the information on this web site.