These Drain and Blowdown ball valves by HCi are
specifically designed for commercial and industrial applications for
use in complementing the Terminator System product line. Like all
Terminator System valves these components boast a state of the
art hot forged brass body and hard chrome plated brass ball which
insures reliable, leak-free performance.

These valves have an integrated 3/4” male garden hose end
connection with a durable plastic retainer and brass cap. Featuring
the “triple sealed stem” which utilizes a virgin PTFE gland packing
and two Viton O-ring stem seals this valve ensures the most reliable
and high cycle-life stem available anywhere. Using these valves in
your system is the perfect compliment to the incredibly high
standard set forth by all the other Terminator System products.

Return to Top

These Mini Drain and Blowdown ball valves by HCi are
specifically designed for commercial and industrial applications for
use in complementing the Terminator System product line. Like all
Terminator System valves these components boast a state of the
art hot forged brass body and hard chrome plated brass ball which
insures reliable, leak-free performance.

Featuring the “triple sealed stem” which utilizes a virgin PTFE
gland packing and two Viton O-ring stem seals this valve ensures
the most reliable and high cycle-life stem available anywhere. Using
these valves in your system is the perfect compliment to the
incredibly high standard set forth by all the other Terminator
System products.

Return to Top

The Terminator B - “Insulator” by HCi is preformed
polyurethane, CFC-free insulation for Hot and Chilled water piping
applications. This material meets the UL 94 H1-F,HBF and DIN 4102 fire
resistance classifications.
The Terminator B - “Insulator” greatly simplifies the insulating
contractor’s job by eliminating the need for custom insulation pieces to
be cut and fit together. This (1) piece split-body design fits snugly over
the valve body, while still allowing easy access to both
pressure/temperature ports, vent tapping, handle and memory stop.
Un-obstructed balancing, throttling and venting means that you get the
insulation needed without compromising the valves functionality.

Thermal Conductibility: 40 Deg. C 0.045 W/mK
Water Absorption: <3% by volume
Volume Weight: 30 ± 3 Kg/m
Utilization Temperature: Bending Test -40 Deg. C
Thermal Stability: Up to +95 Deg. C
Tensile Resistence: Vertical >0.18 N/mm Horizontal: >0.16 N/mm

Return to Top

This manual vent is machined from solid brass bar stock and
finished with heavy nickel plating to provide greater corrosion resistance.
With 1/8” NPT threads, it installs directly into standard fittings and valves.
The stem is slotted to accept a screwdriver or a coin.

125 PSI / 250 Deg.

Return to Top

The operating principle behind the automatic air vent is based
upon hygroscopic discs inside the valve changing between their wet and
dry mode.
The air can also be discharged by manually rotating the plastic
handwheel by two turns. While in manual mode, the built-in check valve
remains open and fluid will escape to atmosphere. After use in the
mode, the handwheel should be closed down to return it to automatic
mode.
Can be installed horizontally or vertically.

MIN. 1.5 PSI - MAX 125 PSI / 230 Deg.

Return to Top

This 2” handle extension insures stable operation of valve while
extending handle to allow for insulation.

Return to Top

The operating principle behind this pressure/temperature port
was to save you time & money. This plug provides access to fluids in
closed systems without disruption and the added expense of installing
permanent test equipment.
The dual core design allows the bottom seal to close, sealing
your system before the probe is fully removed through the top core. The
membrane connection the two separate cores maintains true alignment
for increased ease when inserting probes.
Use anywhere you can use a schrader valve. Can also be used
to bleed air from lines.

MAX 1000 PSI / MAX 350 Deg.

Return to Top

This extruded brass 1-3/4” long by 1/4” NPT Male x Female
fitting accessory extension insures stable operation of accessories to
allow for insulation.

Return to Top

This memory stop is made from forged brass Simply remove the
handle nut, insert the 0-100% indicator pad over the stem, then insert the
forged brass stop over the stem. Insert the screw into the stem, adjust
the stop to the flow required for your application and tighten the screw.
Now your valve will return to the same open position every time you
cycle open to close to open.

Return to Top

The sensible alternative when handle clearance is a concern, this aluminum T-handle ensures stable operation in tight situations.
Also, can be used with ball valve handle extension, making insulating a snap.

Return to Top

The sensible alternative when corrosion and versitility is a concern, this stainless steel handle ensures stable operation while maintaining the functionality of a quarter turn ball valve handle.
Also, can be used with ball valve handle extension, making insulating a snap.

Return to Top

Jomar Seal “ The HEAVYWEIGHT”, all purpose heavy duty thread
sealing compound for leakproof seals on thread connections. Lubricates,
seals and protects threads in an extensive variety of industrial, chemical
and oil field threaded pipe connections over a wide range of services,
temperatures and pressures.

Temperature Rangers: -50 Deg. F to +400 Deg.
Pressure Ranges: Gases to 3,000 PSI;
UL approved Liquids to 10,000 PSA

Return to Top